• CPLMC/
    CPL-10MC
    • Powerful AC spindle motor drive and finned headstock construction for excellent heat dissipation. High torque output combined with constant circumferential speed ensures optimal cutting performance, extra fine and accurate machined surface which greatly increase tool life.
    • VDI Turret: Provide extremely accurate positioning and low noise.Offer a quick change tooling solution and short cycle time.Quick-change clamping method which performs within seconds.High degree of stability due to high locking forces. Connect with centralized lubrication system to ensure high service and usage life.
    • BMT Turret: Provide superior rigidity for forward and reverse machining.Drive with servo motor for very fast bidirectional swivel.Heavy loads of stability due to high locking forces.Hydraulic locking with special tripe generating crown gear.Low kinetic energy of the indexing drive.Fastening snap-ring groove for the tool disk..
Standard accessories
3-Jaw power chuck Hard jaw: 1 set
Soft jaw: 3 set Hydraulic unit
Manual tailstock Chain type chip conveyor
Coolant pump Heat exchanger
Oil skimmer Hand wheel (MPG)
Working lamp Pretensioned ballscrews on 2 axes
Coolant system 3-color signal light
Optional accessories
Collet chuck Oil mist collector Back side chip removing
(CPL-10MC / 20MC / 30MC only) High pressure coolant pump
Special purposed chip conveyor Programmable tailstock Tool setter
CE modification Transformer
Air condition Parts catcher
Auto.door Automatic bar feeder
CONTENT MODEL CPL-10MC
TRAVEL
X axis travel mm 150 + 5
Z axis travel mm 320
CAPACITY
Max. swing over bed mm 450
Max. swing over carriage mm 258
Distance between centers mm 320
Standard turning diameter mm 110
Max. turning diameter mm 170
Max. turning length mm 320
SPINDLE
Spindle motor kw 5.5 / 7.5
Spindle speed rpm 6,000
Spindle nose type A2-5
Spindle bearing diameter mm Ø90
Hydraulic chuck (OPT.) inch 6'' (8")
Hole through draw tube mm Ø45
Indexing of C-axis 0.001
TURRET
Turret type type 12 Servo
O.D. / I.D. mm VDI-30
Tool change time sec. 0.2
Servo motor kw 2.2 / 3.7
Max. tool speed rpm 5,000
TAILSTOCK
Quill diameter mm Ø70
Quill travel mm 80
Quill Taper type MT-#4
FEEDRATE
Rapid feedrate (X/Z) m/min 24 / 24
OTHER
Floor plan (W×D) mm 2,962 × 1,625
Machine weight kg 3,200
Power capacity KVA 15
Coolant tank capacity L 90
CAMPO reserves the right to modify the specifications without further notice.